Spacebar graphic

R1150 RS Dolphine Windshield

The look is classic: DOLPHINE™. It's aerodynamics are Pure Laminar Flow. Similar to a racing bubble with minimum resistance, it features low turbulence and that means low noise. These aerodynamic enhancements add up to better comfort for both the rider and passenger of the R1150RS.

The Dolphine's pushed-out front bubble increases your comfort level. The Dolphine is also wide, giving you good wind protection in rainy or dusty conditions. It makes a great windshield for two-up riding on the R1150RS. Adjusted up, down or anywhere in between, the Dolphine's large bubble smooths out the air flow and the extra width provides a wider air pocket.

The Dolphine windshield is made from clear, tough 4.5mm Lexan® polycarbonate for excellent optics, impact resistance, and crack resistance. The FMR hardcoat gives you excellent abrasion resistance and long-term quality. For simple bolt-on installation, the Dolphine utilizes the original factory mounting points.

The OEM shield produces a turbulent airflow. The Dolphine produces a smooth, laminar airflow in either the lowered or raised setting. This reduces buffeting around the helmet and decreases wind noise as well.
Spacebar graphic
R 1100-1150 RS Slip-on Muffler

The ZTechnik Z4000 Stainless Steel Slip-On enhances the riding experience for R1150RT, R1150RS, R1100GS and R1100R owners. The exhaust features a stainless steel muffler that never needs repacking, and mounts with enough clearance to utilize the stock BMW saddlebags.

Since the Z4000 employs a removable "Decibel Killer", the system offers the rider a choice between stealthy quiet and a healthy growl.

Experience a weight reduction of 54%, better performance, and broader torque. It will put a smile on your face!

Spacebar graphic

Z Technik Storage Pod

ZTechnik's extremely versatile 4-liter rear Storage Pod is a great addition or alternative to the standard tank bag.

In addition to the main compartment, four zippered storage areas (three main areas and one document holder) are attached to a cleverly designed removable tray. On the top of the tray, the three generously sized zippered pockets hold a large number of items. Stuff them all and fill the top cavity of the pod, or remove the tray altogether to open the space into one very large main storage area. The Velcro® hinge makes removal of the tray a snap.

Sturdy double zippers keep everything secured inside while the pod's web straps and coated hooks attach it to the bike. Thinking ahead, ZTechnik included plenty of length in the web straps to make mounting the bag -- under the seat, to the rear tail cowling, or through a rack -- an easy process. Excess strap is pulled to the inside of the bag, keeping everything tight.

The dense thermo-molded pod is covered with a durable canvas outside with a soft inner shell.

SIZE
H: 6.0-4.5" front to back
(15.2-11.4cm)
W: 12.5-9.0" front to back
(31.8-22.9cm)
L: 13.75" (35.0cm)

Spacebar graphic

Helmet Locks

The ZTechnik Helmet Lock for BMW motorcycles uses the license plate bracket to provide storage for two full-face helmets. A sturdy push lock accepts D-ring or web strap loop helmet closures.

Why carry your helmet around, bonking it against everything you pass by? Leave your helmet behind -- safely and securely -- with ZTechnik's Helmet Lock.

The ZTechnik Helmet Lock is manufactured from high strength steel and finished in durable black powder coat. It comes with two matched keys.

 

 

Spacebar graphic

Tech Mounts

Bring along your toll transponder, radar detector, or GPS unit. Add an Accessory Wide Top or an additional TechMount, and add your satellite radio receiver, MP3 player, or just about any other technical gadget you can't live without.

ZTechnik TechMounts are available in a wide range of sizes and mounting options to fit practically any BMW motorcycle. Options include chrome, anodized silver or anodized black finishes, tall or short stems, 7/8" or 1" handlebar mounts, handlebar control mounts, mirror mounts, fairing mounts, K-mounts, accessory wide tops, quick detach plates... the list goes on.

Spacebar graphic

Tech Mounts

SmarTire Tire Pressure Monitoring System provides continuous, real time front and rear tire pressure monitoring. By taking into account preset cold pressure and calculating rotational speed and ambient temperature, SmarTire knows the ideal tire pressure at all times and provides the rider an accurate reading of current tire pressure, current temperature as well as pressure deviation (from ideal pressure).

SmarTire also warns the rider when their tire pressure has passed outside the realm of safe pressure deviation. An example could be a rapid decrease in tire pressure that could result in a blowout if the rider does not stop the motorcycle.

SmarTire technology is achieved through wireless technology that SmarTire has developed specifically for the motorcycle market. The system consists of two sensors installed on the rims and a small receiver/digital display that installs easily on the motorcycle's instrument cluster.

Spacebar graphic